J&M Diamond Tool, Home Page J&M Diamond Tool, Inc.

J&M Diamond Tool, Inc.
Radius Forming Tools Online Store

Full Ball Radius Dresser
J&M Diamond full ball radius Dresser
3/8" dia. x 2" long
J&M Diamond example
TOOL # RADIUS PRICE Qty ORDER
FB-10 .010 $111.00
FB-15 .015 $121.00
FB-20 .020 $133.50
FB-25 .025 $150.25
FB-31 .031 $181.25
FB-62 .062 $444.75
For plunge-forming a concave radius in the center of a grinding wheel. Featuring a 180 degree perfect ball point, it is possible to form an accurate, concave radius even after the diamond has worn just by merely turning the tool in its holder. Designed to save set-up time!
RV Radius Dresser Tools (Bottleneck Dressers)
J&M Diamond RV radius Dresser
3/8" dia. x 3" long
J&M Diamond example
TOOL # RADIUS PRICE Qty ORDER
RV-31 .031 $44.50
RV-62 .062 $44.50
RV-94 .094 $46.50
RV-125 .125 $49.25

For dressing a concave radius in the center of a grinding wheel. Uniquely shaped for fast, efficient performance it is recommended that this tool be used together with a radius dresser. The distance from the point of the diamond to the center line of the shank determines the radius that can be formed in the grinding wheel.
"R" Type Radius Dresser Tools
J&M Diamond "R" type radius Dresser
3/8" dia. x 3" long
J&M Diamond example
TOOL# RADIUS PRICE Qty ORDER
R-10 .010 $28.50
R-15 .015 $28.75
R-20 .020 $30.00
R-25 .025 $36.50
R-31 .031 $36.50
R-62 .062 $39.50
R-125 .125 $51.50
For dressing a concave radius into the corner of a grinding wheel. The "R" SERIES has a natural maacle (macle) diamond with its point concentric with the shank to form the desired radius as stamped on the tool.

J&M Diamond Tool, Inc. 
How to order from the Online Store

J & M DIAMOND TOOL, INC.
Toll Free ( 800 ) 777-6813 - - Fax ( 401 ) 431-2222

 | Home| Company Profile | Contact J&M | Request Quote | Order Form (FAX)  | Site Map
 | Terms and Conditions | Dealer and Distribution Inquires Welcome | Survey

Copyright 2000-2011 by  J & M Diamond Tool, Inc. All Rights Reserved
            Updated 09 December 2015 October 10, 2011